Thunderbolt 3

• Native-like integration with macOS in System Report without the need of flashing a modded firmware. Thank you @benbender
• NOTE: If you do have a modded BIOS firmware, please reset all settings relating to Thunderbolt 3 to default, all that's needed are settings detailed below or in Settings for Vanilla BIOS
• Please make sure of these settings in BIOS:

Main Menu	Sub 1	Sub 2	Sub 3
	>> Config	>> Thunderbolt (TM) 3	Thunderbolt BIOS Assist Mode Disabled
			Security Level No Security
			Support in Pre Boot Environment: Thunderbolt(TM) Device Disabled

Warning

USB 3.1 Gen2 hotplug will likely never work. It is also neither planned nor currently worked on. If you need USB 3.1 Gen2, coldboot the machine with the device attached.